4 Axis Machining parts Special-shaped parts As part of the flow temperature sensor, the parts include features such as curved surfaces, special-shaped grooves, special-shaped mounting seats, circumferentially distributed connecting studs and mounting holes, and high and low pressure interfaces.
① There are high and low pressure pipe interfaces on the contour surface of the special-shaped parts of the high and low pressure pipe interfaces. Since the airflow enters from the equal-diameter inlet section, after the aperture shrinks and becomes smaller and the roar stage transitions, the greater the speed of the gas passing through the roar, the resulting The lower the gas flow pressure. On the contrary, after the aperture expansion becomes larger and the roar stage transitions, the smaller the speed of the gas passing through the roar, the greater the gas flow pressure generated.
②Fixed installation pillars There is a fixed installation pillar in the high-voltage area and the low-voltage area, with the same structure and size, and the safety hole is processed at the center position, which plays the role of fixing and matching parts.
③Interface of the temperature-sensing component The size of the interface is connected to the temperature-sensing component, the inner hole is threaded, the height of the strut and the depth of the thread are related to the structure of the temperature-sensing component, and there is an insurance hole processing at 45° behind the interface side of the temperature-sensing component. Play the role of fixing mating parts. We have a complete set of equipment, CNC turning/milling/grinding/drilling/processing. We welcome partners who have parts processing needs to call and contact us for a quotation.
④Sealing interface The sealing interface is divided into the inlet end and the outlet end, and both are connected with the sealing ring. The machining dimensional accuracy is required to be high, so as to ensure that there is no leakage of the gas flow at the inlet end and the outlet end, otherwise the gas flow pressure in the inner cavity will be lost. pressure phenomenon, resulting in inaccurate airflow pressure at the output end of the high and low pressure pipe interfaces.
⑤U-shaped grooves are evenly distributed on the inside of the front and back platforms of the special-shaped parts of the upper and lower cover plates, and the local positions are connected with the welding pillars, which are fixed by welding processing methods. Connected components and other test products.
Our sales and services are spread all over the world. The products are exported in large quantities to developed countries such as Europe, the United States, Japan, etc., and have established long-term friendly cooperative relations with many internationally renowned brand companies.The main business of our company are: Cnc Turning Parts, CNC Machining Parts, Gear Cutting, Lighting Accessories, Precision Grinding Parts and Hardware Parts.
