With the characteristics of high production efficiency and high precision of machining workpieces, CNC lathes are more and more applied to modern enterprises. The CNC turning process is a combination of methods and technical means used in CNC machine tool processing. It mainly includes several aspects.We also have Cnc Turning Parts, CNC lathes at least have the ability to drive the cutting tool through 2 axes (called X and Z) under G-code control.
1. Understand and determine the processing content of the workpiece; first analyze the structure and processing requirements of the workpiece, calculate and design the processing method, clamping method, tools used and cutting amount.There are also CNC Machining Parts, which are composed of spindle boxes, spindle motors, spindles and spindle bearings. The start, stop and speed change of the spindle are controlled by the numerical control system, and the cutting tool is involved in the cutting motion through the tool installed on the spindle, which is the power output component of the cutting process.
2. Design the processing procedure; according to the required precision, shape, size and surface roughness of the workpiece, rough and finish the workpiece respectively. The processing sequence follows the standard of rough first, then fine, near and far, cross inside and outside, and base surface first.There are also Gear Cutting. The processing methods of precision gears include casting, forging, cold rolling, hot rolling, cutting, etc. Among them, cutting is the most common.
3. Attention should also be paid to the selection of tools and fixtures and the positioning of clamping. In the process of CNC turning, the number of clampings should be reduced as much as possible, so as to improve processing efficiency and ensure processing accuracy. Choose as large a tool as possible, the amount of cutting that can be tolerated will be larger, and the service life of the tool will be longer.There are also Lighting Accessories, some lighting parts, used for assembly; there are also a series of products such as Precision Grinding Parts and Hardware Parts. If you want to know more, please contact us, we have a large stock in stock and will serve you wholeheartedly!
If you want to give full play to the performance of CNC machine tools, in addition to mastering the operation methods and processing characteristics of the machine tools, you should also understand the process analysis during programming in detail to get the best processing plan.
