When it comes to the maintenance and construction of optical fiber lines, the word "fusion splicing" must be avoided. Fusion splicing two sections of optical fiber requires not only a fusion splicer, but also a cutting knife to cut the end face of the optical fiber, and this involves today's topic: a cutting knife.
In fiber optics, it is often desirable to use optical fibers with clean end faces. Usually obtained by cutting, that is, controlled damage. The instrument used for this purpose is called Fiber Cleaver. Let me introduce it to you in detail:
How to maintain the cutting knife 1. The optical fiber cutter is a precision device, and non-professionals are not allowed to disassemble the machine at will to avoid human failure. 2. Never use a fiber cutter to cut anything other than optical fiber, so as not to damage the fiber cleaver blade. 3. Please wrap the fiber scraps after cutting with waste paper and throw them into the special dustbin. 4. The blade of the cutting knife is very sharp and easy to hurt people, please do not touch the blade of the fiber cleaver tool with bare hands. the 5. If poor cutting occurs after cleaning, please rotate the cutting blade or adjust the height of the cutting blade. Precautions 1. The disassembly and oiling of the machine body (cutter) are the cause of failure and must not be carried out. 2. The cutting knife is a precision machine, knocking and landing (strong impact) may damage the machine and reduce the cutting performance, please be careful when using it. 3. Optical fiber and fiber debris are very fine and sharp. Prick your fingers, get into your eyes, and it can cause damage. So please do it with care. 4. Please throw fiber debris in a dedicated waste place that is separate from ordinary garbage. 5. If the machine breaks down or is abnormal, please stop using it. High-precision cleaver for fiber optics - small size, easy to use, fine workmanship
A fiber optic cleaver produced by our company. The workmanship, material and design of this fiber optic cleaver have been greatly improved compared with the previous cutters. It is small in size, easy to use, and fine in workmanship. The problem of uneven section, so that the construction personnel can go smoothly, rest assured that the construction does not have to worry about the signal degradation caused by cutting. The ultra-high hardness imported blade has long service life and stable quality. It is precision processed by imported CNC machining center with high precision.
