The precision hardware processing process is based on the production needs to order the steel material from the material supplier. After the steel material is ordered, the material is opened. After the material is opened, the four-sided tolerance test is carried out. After the detection is completed, the small details such as the production of small accessories can be taken directly Go to the punching machine and then perform milling or CNC processing. For example, there are many such details in the production of auto parts. And to make a container is almost to open the material, after punching, it can be directly used for welding, and then sanding and then spraying oil, and then assembling some accessories can be perfectly shipped. 2. Safe operating procedures for hardware processing 1. When performing hardware processing. Operators must maintain the correct posture and have sufficient energy to cope with the work. During operation, they must concentrate their thoughts, chat and cooperate with each other. Operators must not operate in a state of irritability and fatigue. For personal safety, avoid accidents and ensure Safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a safety helmet. 2. Check whether the moving part is filled with lubricating oil before the mechanical action, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. It is strictly forbidden to operate when the machine is faulty. 3. When starting the power to start the machine, you must wait for all other personnel to leave the working area of the machine and remove the sundries on the workbench before it can be started. 4. When the machine is working, it is forbidden to reach into the working area of the slider, and it is strictly forbidden to pick and place the workpiece by hand. Standard tools must be used when picking and placing the workpiece in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board. For the safety of others, they are not allowed to put their hands in the working area of the machine or touch the moving parts of the machine with their hands. 5. When changing the mold, first turn off the power, and after the press movement department stops running, you can start to install and debug the mold. After installation and adjustment, move the flywheel by hand to test punch twice. In order to avoid unnecessary collisions between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and reasonableness, whether the screws are firm, and whether the blank holder is reasonable. Location. We are a custom factory, Main business scope is: Cnc Turning Parts, CNC Machining Parts, Gear Cutting, Lighting Accessories, Precision Grinding Parts, Hardware Parts and so on. If you are interested in our products, please contact me. The sincerity anticipates your reply.
